Good dive gloves are not cheap. If you indulge in activities like lobster hunting or gold hunting they don't hold up very well. The finger tips wear out, become riddled with holes and lose their ability to keep your hands warm and cut-free.
 

In this article I will outline an easy procedure to make those Woven gloves last longer. And, you can use it over and over on the same gloves.
 

First hint; don't let the gloves become damaged before doing this procedure. An ounce of prevention is worth a pound of cure later.
 

You will need three things in addition to your new gloves:
 

One, there is a product out there that we all use on our knee pads and wetsuits to repair tears and cuts called Aqua Seal. Obtain some of this product at your local dive store. The product comes in two packages one just the seal material and the other combines it with a bottle of Cotol 240. Cotol-240™ Cleaner & Cure Accelerator is a urethane cure accelerator to be used in conjunction with Aquaseal®. The solvent dilutes the seal material, making it easier to use, and more importantly speeding the tack time to 15 minutes and the full cure time to less than two hours. The combination package it the one you want.
 

Two, obtain some common sand to use in the procedure.
 

Three, go to your local hardware outlet and get a couple of those inexpensive, metal handle brushes used to spread flux when you are going to solder copper pipes.
 

It is finest to hold out the subsequent within a well-ventilated area. The merchandise cures a lot quicker within a cozy area.

Put reducing a newspaper or cloth you don't need to keep, which means you don't create a mess. on the product of cardstock or cardboard, (try to come about throughout some that is not really absorbent) squeeze out an ounce in the Aqua Seal. blend it with some Cotol so it is good and runny but not liquid. blend it using the brush.

Apply this mixture toward the factors in the gloves and wait around a few mins (maybe 10). The preliminary coating will most most likely soak in to the glove tips. So, it is for the most part a superb notion to take advantage of a next coat toward the glove tips. wait around 30 - sixty mins until the mixture is tacky but not set. Dip the glove factors in to the sand and allow dried out about two hours.

If you choose you can repeat the procedure to include additional sand. However, be cautious to not satisfy as well a good offer materials near to the glove tips. as well thick of the layer will make the glove factors stiff and un-flexible.

Now your gloves will provide you with a good offer much better support by lasting longer. one more part effect with this process are steering to be the gloves will possess a much better grip. Have pleasurable diving and beneficial hunting.